Schtec

SVMC 120 Profile Machining and V-Type Cutting Center

Standard Features

Infeed magazine, 11 pieces can be loaded on the machine. (Max. length 6.5 m)
Simultaneous optimization on the machine allows the machine to self-optimize on the waste
profiles, this can be switch between FDS control and machine control.
Height and width detection to ensure correct profile is loaded.
New design of loading station allows profiles to be loaded simultaneously, this feature
increase the efficiency of profile changeovers.
The 4-axis routing portal comprises of 11 high speed routing motors utilising 5mm & 8mm
cutters at 0 ,90, 180 & 270 degrees plus 3, servo-driven angle router motors with 5mm
cutters for multiple profile suites with different rebate drainage angles.
This allows the SVMC120 to produce all preps in PVC profiles such as drainage, spot marking,
euro-cylinder holes, night vents, hinge holes, handle holes, euro groove routing etc.
Highley efficient simultaneous routing operations on 4-axis routing portal, allowing
machining from the top and bottom concurrently for door handles and night vents etc.

All angles between 30 - 150 degrees are cut with 0.1 degree accuracy with servo axis
controlled 500 mm diameter saw.
Newly designed double clamping system to stabilise both the bevel and rebate with
individual clamps and profile specific software controlled variable clamping pressures on
each of the 4 sawing clamps.
Software controlled transom support for Z & T profiles.

Private HMI software developed by Schtec Software Department allows different kinds of
window design program data files to be uploaded on machine, fully compatible with
established UK software BM and First Degree.
All alarms and machine faults are displayed on HMI along with solutions.
15” Touch Screen and high-performance industrial PC with Windows Embedded system.
Industrial PC Based Servo Control System (Beckhoff)
Online diagnostic and troubleshooting via user friendly interface.
File transfer by USB or ethernet network and remote desktop connection by Wi-Fi or
Ethernet connection
Central lubrication system reduces the time spent for maintenance.
Scrap conveyor under saw and extraction ports on all saw blade cowls.
Capacity 100-110 frames per 8 hour shift depending on complexity (timings based on 14
piece top over fixed next to a side light) Approximately 1 piece every 18.6 seconds.

Technical Informations

Voltage: 400 V, 3 PH, 50-60Hz
Power Consumption: 9.8 kW, 32 A
Max. Profile Height: 92 mm
Min. Profile Height: 40 mm
Max. Profile Width: 125 mm
Min. Profile Width: 35 mm
Min. Cutting Depth (V):: 15 mm
Max. Profile Bar Length: 6.500 mm
Max. Process Length for Profile: 6.000 mm
Maximum Cutting Length: 3.500 mm (can be increased when it needs)
Minimum Cutting Length: 320 mm
Min. Process Length for Profile: 600 mm
Shorter scrap into rear waste basket: 275 mm
Scrap length in frontal basket waste: > 400 mm
Shorter cutting length discharged on unloading: >320 mm (*)
Longer cutting length discharged on loading: > 4.000 mm (*)
Tool Count: 11 high-speed air-cooling spindles S
Saw Diameter (Top): D= 500 mm d=30mm (Main Saw)
Saw Diameter (V Notch): D= 300 mm d=30mm (x2)
Max Tool rpm: 18.000 rpm Max.
Axes Speed (Processing): 50 m/min
Max. Axes Speed (Saw): 100 °/sec
Max. Axes Speed (Carrier): 40 m/min
Air Pressure: 6-7 Bar
Air Consumption: 1480lt /min
Voltage: 400 V, 3 PH, 50-60Hz
Power Consumption: 9.8 kW, 32A (Max Consumption)
Machine Height: 2.200 mm
Machine Width: 3.450 mm
Machine Weight: 5.350 kg
Machine Length: 16.800 m